Brose CPU and Interface Boards
touchit screen A065GW01 VO!!! touchit digitizer 160x95x2mm , 4 wire, offset connector 65mm smaller side
50000 vs 60000 springs on display - none mfd unk - 2007 brown pcb - green pcb
remove 4 screws T5(xxxx50000)= or T4( xxxxx60000) unlatch touchscreen and heater cable disconnect speaker remove 4 big philips screws pull out main pcb from housing, don't loose the 15x4mm black tubes on light towers unscrew 2x 5mm nuts from ccfl inventer and disconnect backlight from display and pcb, don't loose the two 5x5mm stances disconnect heating if present unscrew 4x philips screws from lcd, lift up board don't forget the tubes!!!! replace lcd, two small stands must align into holes place screen on flat protected surface reconnect lcd cable, don't lift!!! screw back 4 screws set back lcd inventor, don't forget stands!!!
Brose CPU Boards
| Image | Description |
|---|---|
  | SS-1 CPU Board |
  | SS-3 8412 CPU Board |